Product ID: ITB-1AB011B1
Availability: InStock
Condition: New
Min Order: 1
Warehouse Location: ghaziabad
Country of Origin: India
Free Shipping. Delivery anywhere in India.
Delivery: 7-14 business day(s).
Read return policy in policy center.(link available on footer)
share it
Inclusive All Taxes.


4831 Excl. GST

Model-800AH We offer model 800AH programmable amp-hour meter, that is used for electroplating thickness control and testing battery Amp-Hr. These meters are available with 6 RED 7 Segment LEDs of 0.56” character height. However, the current display is fixed at Max 9999 Amps using a shunt of current & 75mV for user programmed. Following are some of the features of our model 800AH programmable amp-hour meter: • Shunt calibration programmable • Stores cumulative Amp-Hour • Instantaneous current display • Settable Limit for Amp-Hr/Min • Front membrane switches for easy operation • Non-volatile memory for storing settings, hence no battery required
Display6 RED 7 Segment LEDs of 0.56” character height.
Current DisplayMax 9999 Amps using a shunt of current/75mV. User programmed
Amp-HourMax 999999 A-H for each preset cycle. (Amp-Hour range is selected by shorting Pin 17-18 at the rear)
Amp-MinuteMax 999999 A-Min for each preset cycle. (Amp-Minute is selected, opening the link between Pin 17 & 18).
Max shuntMax value of 9999 Amp corresponding to 75mV
Totaliser6 Digits for Amp-Hour or Amp-Min. i.e. 99,99,99. (readable for 10 sec by going into ‘total’ mode).
LimitUp to 999999 AH or Amin. setting (In limit mode using incr./ decr. switches).
Relay ContactOne NO-P-NC of 5 Amp rating.
Trigger startBy pressing front panel switch or closing a rear external contact.
Battery Back-UpNot required. Programmed values & readings, including A-H stored in EPROM.
LockElectronic lock for calibration (open link between Pin 1 & 2 to lock CAL)
Low Volt. TriggerSet at 10.5V internally. For testing 12V Battery AH. (With Pin 3 & 4 shorted).
Increased Res.0.1AH or 0.1AMin facility by shifting internal jumper.
Supply220V AC ? 10%
SizeFront Facia 96mm x 96mm Din Size. Depth 135mm. Cut Out : 91mm x 91mm.
Weight800 grams

my cart

my wishlist

my account

Register now and experince the best service(s).