VERSATILE APPLICATIONS

• Cutting of Mild Steel
• Ferrous-Non Ferrous Alloy Steel
• Stainless Steel
• Brass, Copper & Aluminum
• Round Bar & Square Bar
• Rectangle
• Forging Billets
• Pipes / Flat / Angles
• Channels / Columns & Structural Steel

TECHNICAL SPECIFICATION FOR SBM– SWING TYPE MANUAL BANDSAW MACHINE

Model: SBM-200M / SBM-250M / SBM-300M / SBM-350M / SBM-400M

S.NO.	TECHNICAL DATA	SBM-200M	SBM–250M	SBM–300M	SBM–350M	SBM-400M
1	Cutting Capacity – Round Bar (mm)	200 mm	250 mm	300 mm	350 mm	400 mm
2	Cutting Capacity – Square Bar (mm)	200 x 150	200 x 200	300 x 250	300 x 300	350 x 350
3	Main Drive HP, 1440 RPM	1HP, 1440RPM	1.5HP, 1440RPM	1.5HP, 1440RPM	2HP, 1440RPM	2HP, 1440RPM
4	Blade Size (mm)	3000x27x0.9	3300x27x0.9	3760x27x0.9	4100x27x0.9	4420x34x11
5	Cutting Speed (mtr/min)	24-45-76	25-35-45	35-55-75	25-35-45	25-35-45
6	Coolant Tank	40	40	40	40	40
(Ltr.)
7	Floor Space	1500x590x950	2000x600x900	1725x600x1270	2550x830x1050	2650x830x1200
8	Net Weight	325	325	650	650	775
(Kgs)

SALIENT FEATURES

S.NO.	TECHNICAL DATA	SBM-200H	SBM–300H	SBM–400H
1	Cutting Capacity – Round Bar	200 mm	300 mm	400 mm
(mm)
2	Cutting Capacity – Square Bar (mm)	200 x 175	300 x 250	400 x 350
3	Main Drive HP, 1440 RPM	1.5HP, 1440RPM	2HP, 1440RPM	3HP, 1440RPM
4	Hydraulic Motor HP, 1440RPM	0.5HP, 1440RPM	0.5HP, 1440RPM	1HP, 1440RPM
5	Coolant Motor HP, 1440RPM	0.13HP	0.13HP	0.13HP
6	Total Power HP	2.13HP	2.63HP	4.13HP
7	Vice Clamping	HYDRAULIC	HYDRAULIC	HYDRAULIC
8	Band Tension	MANUAL	MANUAL	MANUAL
9	Blade Size (mm)	3505 x 27 x 0.9	3760 x 27 x 0.9	4570 x 34 x 1.1
10	Cutting Speed (mtr./min)	18 – 24 – 44 - 68	24 – 40 – 55 - 76	20 – 75
11	Coolant Tank (ltr.)	50	50	50
12	Hydraulic Tank Capacity	25 litre	25 litre	25 litre
13	Hydraulic Band Tension	Optional	Optional	Optional
14	Gear Box Oil Capacity	1 litre	2 litre	4.5 litre
15	Floor Space (LxWxH) (mm)	1550 x 575 x 875	2450 x 850 x 1250	2750 x 800 x 1250
16	Net Weight (Kgs)	800	1200	2000

SALIENT FEATURES

• Hydraulic cutting feed system with flow control valve from hydraulic power pack

• Carbide guide with Roller Bearings

• Blade alignment in vertical & horizontal side

• Higher hydraulic cutting speed

• Less tooling cost due to higher blade life

• Less Power consumption due to continuous cutting

• Good parallelism in cutting due to adjustable blade guide

• Heavy Duty Worm / Helical Reduction Gear Box

• Complete Hydraulic System

• Complete Electric System

• Complete Coolant System

• 1 No. Bimetal Band Saw Blade

• Chip Brush for Scrap removing

• Machine Instruction Manual

• Complete Electric System