Dusol Technologies Offer two dust collector, either top entry or hopper entry, depending on your particular needs. Top entry is the most effective design for fine dust. Since the air flow is downward, it aids the migration of fine particulate towards the hopper. Hopper entry is the proven choice for coarse, heavy dust and high dust loads, which require air -to-cloth ratios of 6:1 or less. Heavy particulate naturally move downward to the hopper. Our dust collectors are designed bag removal and a construction consisting of a top plenum, housing and hopper section. No matter what the design, these marks of superior craftsmanship remain constant.

• Dust Laden air enters the unit through a high inlet designed to reduce upward internal velocities which are prevalent in bottom entry collectors.Dusol TechnologiesDust Collectors designs have improved the high inlet by incorporating a dropout section and perforated baffle plate causing velocities to be lowered at the entry to the collector. This feature allows heavier mass dust particles to drop out into the hopper and reduces the amount of dust carried to the filter media. Controlling velocities and direction of air movement within a dust collectors are very important to the efficiency of the unit as they reduce re-entrainment of dust. Dusol Technologies dust Collectors patented cleaning mechanism generates a short powerful burst of induced air flow into the top of the bag. These bursts reverse the air flow momentarily flexing the fabric bags to knock off excess dust agglomerated on the top layer of the filter cake while maintaining a functional filter cake. The purge tube with patented high velocity nozzles is positioned directly over the openings at the top of the bags. Each purge tube is connected to a large fast at the top of the bags. Each purge tube is connected to a large fast acting diaphragm valve are pneumatically operated and actuated by direct acting solenoid pilot valves, controlled by an adjustable electronic timing panel.
• The patented high velocity nozzle allows Dust Collectors to eliminate the venturies used in most generic pulse-jet collectors. Venturies can restrict filtering velocity, impede cleaning, and cause puffing and abrasion around the top of the bags. With the patented high velocity nozzle, our cleaning system is able to use higher air-to-cloth ratios and less compressed air while inducing more air per cubic foot of compressed air than plain orifices, conventional converging nozzles, or straight nozzles.