• The two in one machine will be on robust structure fit for both center and side sealing of 70 to 450 GSM fabric up to 6 feet max

• Our Two in One Heat Sealing Machine Seals of HDPE/PP Laminated Fabric, LD Sheet of above 500 gauge & PVC Coated, SRF Nylon Sheet, Flex Banner (Poster), Polyester Fabric Coated Material

• The machine will have 6 feet guide rolls at the side where the fabrics enters and sealed fabrics falls at the bottom where it can be folded easily and one side open

• The center cantilever will have heavy steel structure to mount electrical controls air blower and pressure system assemblies

• This machine have 2 Nos. of unwind, with braking attachment shaft

    Power Load (Three Phase Supply)

• 1 HP DC drive for machine roller.

• 1 HP AC motor for air blower.

• 4.0 KW (5.4 HP) heater.

• Total load - 7.4 HP

     Control Panel: In house electronic and electrical assemblies and DOL’s for blower’s etc. Each circuit will be provided with ELMCB for safety plus a heavy duty MCB for the mains.

     Drive System: The machine will be provided with DC motor (Thyristor Controlled) coupled to heavy-duty reduction gearbox via chain and sprocket through the main shaft.

     Heating System: Forced heated air through nozzles at the nips.

     Utilities to be provided by Client: 4 Sq. mm 4 Core copper cable for main supply to the machines with proper earthling

     Size of the Machine: Two in One Heat Sealing Machine 10 feet long for 1.8 meter fabrics

      Output: 25 to 60 Mtr / Min at optimum speed either center or side sealing (Depending on operating Conditions)