| Cycles | 50 |
| Motor rating | 0.5 H.P. |
| Supply | AC |
| Phase | Single Phase |
| Frequency | 50 Hz |
| Voltage | 230 V |
| This mixer has three-speed constant mesh gearbox driven |
| by an electric motor fully enclosed within the transmission |
| case. The low-speed drive automatically comes into |
| action when either on light loads, speed changes may be |
| made without switching off the motor, but on heavy load |
| , the motor should be switched off. A gear train to provide |
| smooth gaer change and also protect the transmission |
| machanism. Ball bearings are used throughout which |
| together with all gears run in special lubricant requiring no |
| attention for several years. All the machanism from the beater |
| shaft to the motor is enclosed. Supplied |
| complete with stainless steel bowl fitted with handle |
| beater and hook.Fitted with heating Jacket thermostatically |
| control. |
| Speed (RPR) Attachment Beater |
| Low 61 107 |
| Intermediate 113 198 |
| High 205 361 |
| Motor rating : 0.5 H.P. |
| Operation : 230 volts single phase, 50 cycles , AC supply. |
| Brand Name | Rajco Scientific And Engineering Products |
| Model | ITB-A2D24CDB |
| Condition | New |
| Unit Type | Nos |
| Minimum Order Quantity | 1 |
| Minimum Ordered Packs | 1 |
| Country of Origin | India |
| Taxes | Inclusive of Tax |
| Ships from | Delhi |
| Shipping | Product eligible for free shipping |
| Returnable | 7 Days Return |
| Warranty Type | Manufacturer / Seller |
| Warranty | Not Applicable |
| Cycles | 50 |
| Motor rating | 0.5 H.P. |
| Supply | AC |
| Phase | Single Phase |
| Frequency | 50 Hz |
| Voltage | 230 V |
| This mixer has three-speed constant mesh gearbox driven |
| by an electric motor fully enclosed within the transmission |
| case. The low-speed drive automatically comes into |
| action when either on light loads, speed changes may be |
| made without switching off the motor, but on heavy load |
| , the motor should be switched off. A gear train to provide |
| smooth gaer change and also protect the transmission |
| machanism. Ball bearings are used throughout which |
| together with all gears run in special lubricant requiring no |
| attention for several years. All the machanism from the beater |
| shaft to the motor is enclosed. Supplied |
| complete with stainless steel bowl fitted with handle |
| beater and hook.Fitted with heating Jacket thermostatically |
| control. |
| Speed (RPR) Attachment Beater |
| Low 61 107 |
| Intermediate 113 198 |
| High 205 361 |
| Motor rating : 0.5 H.P. |
| Operation : 230 volts single phase, 50 cycles , AC supply. |