Description

We are offering Electromagnetic Flow Meter. Using time proven electromagnetic flow metering principle, ADDMAS flow meters are available for pipes from ½ “ NB to 12” NB. Since there are no moving parts, the flow meter gives years of maintenance free service. Its performance is independent of temperature, pressure, density, and viscosity of the medium.

Features:

• Optional Digital Transmission

• Isolated 4 to 20 mA current output

• IP 65 Field / Wall Mounted Enclosure

• 2 Line Alphanumeric backlit display

• Flange/sandwich type mounting

Technical Details:

• Process Connection S series: SS 304 M.S. 150 Flange

• E series: Epoxy painted M.S. # 150 Flange

• Lining: S series Lining: PTFE. E series: Hard Rubber / EPDM / Neoprene

• Sensor Housing: Epoxy painted M.S OR SS 304 optional

• Flow Velocity: 0.1 to 10 m/s in two ranges

• Pressure Rating: Standard Flanges - ASA150 options on request 15 bar Standard, higher on request

• Operating Temperature Medium: S series: 0 to 150 Deg.C for PTFE Lining. E Series: 0 to 70 Deg C for Hard Rubber Lining

• Operating Temperature Ambient: 0 to 55 Deg.C

• Power Supply: 24VDC or 230VDC or Battery Operated

• Power Consumption: 12VA max

• Key Board: 6 Key Membrane Key Board

• Discharge range, Comm. Parameters Calibration Constant, Filter Constant

• Data Logger (Optional): RTC with 24 column Printer, Battery Charger + SMF Batteries and

• Data Transmission (Optional: RS 485 MODBUS RTU of ASCll Protocol or RS232C, HART, with 4 to 20 mA option as add-on module - available

• Data Communication (Optional): An SMS based or GPRS based

• Communication module with software is available as optional extra.

• Modem connects through the RS232C port. The flow meter can be

• Equipped with GSM Modern. Thus following configuration can be given:

• Respond with data. Data to be a message(SMS) from any user.

• (Query response mode)

• Periodic GPRS based Data transmission to a fixed IP address/user's website.

• Respond to an SMS to Cell number stored, in case of the alarm condition.

• Flow parameter: Programmable - Volume Units: Liters, M3, ML, CF, BG -

• Time Units: sec, min, hrs

• Configurable Parameters: F.S. for 4 to 20 mA range, %Low flow cut off, Communication Parameters Calibration Constant Damping (Filter)

Application:

• These Flow meters find varied applications where the flowing medium is difficult to handle. The major advantage of these flowmeters is zero pressure drop, No moving part and highest accuracy level at most affordable cost. Some of the major application can be described below:

• Effluent Treatment Plant

• Sewage Treatment plant.

• Water supply Schemes

• Pulp and Papers

• Sugar industries and distilleries

• Steel and Aluminum

• Chemical / Pharmaceuticals

• Food and Drugs.

Advantages:

• Obstruction fewer measurements

• Nothing projects into the flow stream, no head loss, no parts to maintain.

• Suitable for corrosive liquid Acids, caustic and Corrosive additives are isolated from the meter pipe by inert linings and compatible electrodes.

• Suitable for all types of electrically conductive liquids. Liquid where conductivity is of sufficient level to induce measurable.