SKU: ITBS46B8AC93
MPN: ITB-46B8AC93
Product ID: ITB-46B8AC93
Availability: InStock
Condition: New
Min Order: 1
Warehouse Location: Ahmedabad
Country of Origin: India
Free Shipping. Delivery anywhere in India.
Delivery: 7-14 business day(s).
Read return policy in policy center.(link available on footer)
share it
Inclusive All Taxes.

300000.00

254237 Excl. GST

Membrane Bioreactors (MBR) are treatment processes, which integrate a perm-selective or semi-permeable membrane with a biological process. It is the combination of a membrane process like microfiltration or ultrafiltration with a suspended growth bioreactor, and is now widely used for municipal and industrial wastewater treatment with plant sizes up to 80’000 population equivalents. Due to it being a very technical solution; it needs expert design and skilled workers. Furthermore it is a costly but efficient treatment possibility. With the MBR technology, it is possible to upgrade old wastewater plants. Two MBR configurations exist: internal/submerged, where the membranes are immersed in and integral to the biological reactor; and external/sidestream, where membranes are a separate unit process requiring an intermediate pumping step. Recent technical innovation and significant membrane cost reduction have enabled MBRs to become an established process option to treat wastewaters.As a result, the MBR process has now become an attractive option for the treatment and reuse of industrial and municipal wastewaters, as evidenced by their constantly rising numbers and capacity. Membrane bioreactors can be used to reduce the footprint of an activated sludge sewage treatment system by removing some of the configurations of SBRs the basic process is similar. The installation consists of at least two identically equipped tanks with a common inlet, which can be switched between them. The tanks have a “flow through” system, with raw wastewater (influent) coming in at one end and treated water (effluent) flowing out the other. While one tank is in settle/decant mode the other is aerating and filling. At the inlet is a section of the tank known as the bio-selector. This consists of a series of walls or baffles which direct the flow either from side to side of the tank or under and over consecutive baffles. This helps to mix the incoming Influent and the returned activated sludge, beginning the biological digestion process before the liquor enters the main part of the tank. There are five stages in the treatment process

• Fill

• React

• Settle

• Decant

• Idle


my cart

my wishlist

my account

Register now and experince the best service(s).