The length of the characters is changed based on the mounting angle of the print head and the input settings. We can print the sharp characters that are configured with "Surface" and which are close to printing, and not the characters that are configured with "Points" as in valve type Ink jet printers. High speed production lines exceeding 100m/minute are also supported.
| Humidity |
10-80 % RH |
| Voltage |
100 V AC |
| Character Length |
2 to 40 mm |
| Head Count |
1 to 4 |
| Registered Message Count |
Maximum 999 for 1 head (Based on the CF card capacity) |
| Frequency |
50/60 Hz |
| Power |
300W or less (In case of 4 head) |
| Temperature |
5 to 35 Degree C |
| Nozzle array |
3 holes/nozzle,6 holes/nozzle |
