1. Automatic common iron nail making machine are mainly used for manufacturing all kinds of nails.
2. Both scrap and new steel wire can be used to make nails, it can feed the materials automatically,
3. It is high speed, quality nails, durable machine, low power, less impact and good continuity with the great accuracy.
4. Nails of 1 inch to 6 inch can be produced through these machines.
5. Approximately each machine gives profit of Rs.15, 000 to 25,000/month
6. This High Speed wire nail machines retained basic design and simple operation for Friendly use.
1. Balanced critical parts results low vibration & enhance life.
2. All Lubrication parts are served by centralized automated cyclic lubrication system for long life. Automatic oil pump and also through oil cups both the facilities are available.
3. A new feeding system permits the use of large wire bundle and maintains close tolerance.
4. Harden ground wedge type die box for longer life and easy low cost refurbishing.
11.Round index able Gripping dies with Eleven Grooves enabling eleven times longer life without any reprocessing
MANPOWER required for 4 machine set
N1-1machine, N3-2machines and N6- 1Machine. = Total- 4 Machines. 1- One (1) Technician for setting the cutters and dies.
2- Two (1) Helper for collecting nails and to polish them.
3- One (1) Person for packing nails in boxes or in 50 kg sacks.
Space required: 600 sq feet.
1- One (1) Technician for setting the cutters and dies.
2- Two (1) Helper for collecting nails and to polish them.
3- One (1) Person for packing nails in boxes or in 50 kg sacks.
Space required: 600 sq feet.
| Gauge |
08-14 |
| MM |
2 mm to 4 mm |
| Power HP |
3 |
| Motor pole |
2 |
| Area of Machine |
1100*950 |
| Nail Size in Inch |
0.5 to 4 mm |
| Nails/ minute |
350 |
| Production/ 8 hours |
700 kg |
.jpg)