The Comparative Tracking Index Tester is used in determination of the comparative tracking index of solid insulating materials as per IEC 60112 2003-01. This test is to determine the resistance to tracking in insulating parts supporting live parts used for electrical accessories such as MCBs, switches, sockets, plugs, starter holders, connectors etc. The CTIT-01 indicates the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed, under electric stress, to water and other environmental contaminants. This test also referred in many other standards such as IS 2824 – 1975, IEC 60335.
FEATURES
Built in electrolyte container with pump, producing drops of 20 + 3mm³ volume at precise interval of 30 seconds. The drop falling height is adjustable to 35 mm.
Priming facility for the pump to enable removal of initial electrolyte having higher concentration.
Fully automatic unit with minimum of controls & adjustments.
Micro-controller based timer control unit used to set the timing and to control the sequence of operations.
Preset load on the electrodes with a force of 1.0 N each.
Short circuit release – 0.5 A for 2 Sec; Short circuit current limited to 1A.
Electrode Voltage Setting – 0 to 230V, 0 to 350V, 0 to 450V, 0 to 550V, 0 to 650V adjustable.
Current limiting resistances automatically selected with test voltage.
Adjustable platform with glass top for placing the sample.
Clear acrylic front cover for safety and a draught free surrounding.
Cover open interlock switch for safety.
Exhaust fans for removal fumes.
SELLER: Mcsparr Test Systems and Chemicals Pvt Ltd
The Comparative Tracking Index Tester is used in determination of the comparative tracking index of solid insulating materials as per IEC 60112 2003-01. This test is to determine the resistance to tracking in insulating parts supporting live parts used for electrical accessories such as MCBs, switches, sockets, plugs, starter holders, connectors etc. The CTIT-01 indicates the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed, under electric stress, to water and other environmental contaminants. This test also referred in many other standards such as IS 2824 – 1975, IEC 60335.
FEATURES
Built in electrolyte container with pump, producing drops of 20 + 3mm³ volume at precise interval of 30 seconds. The drop falling height is adjustable to 35 mm.
Priming facility for the pump to enable removal of initial electrolyte having higher concentration.
Fully automatic unit with minimum of controls & adjustments.
Micro-controller based timer control unit used to set the timing and to control the sequence of operations.
Preset load on the electrodes with a force of 1.0 N each.
Short circuit release – 0.5 A for 2 Sec; Short circuit current limited to 1A.
Electrode Voltage Setting – 0 to 230V, 0 to 350V, 0 to 450V, 0 to 550V, 0 to 650V adjustable.
Current limiting resistances automatically selected with test voltage.
Adjustable platform with glass top for placing the sample.
Clear acrylic front cover for safety and a draught free surrounding.
