These chucks have approximately twice the jaw stroke compared to the AIRTECH WH standard chucks. Hence they are used for chucking comparatively irregular shaped components. Manufactured from high-grade alloy steel, all the sliding surfaces of these chucks are hardened and ground for accurate running and long service
Standard hard and soft jaws can be replaced with special hard and soft jaws for chucking different components. These compact and sturdy chucks offer better grip together with high repeatability. Also stable gripping power at higher speeds makes these chucks ideal for CNC applications. These chucks are activated by rear mounted hydraulic or pneumatic cylinders via the draw bar / draw tube passing through the spindle bore. Since it is important that the cylinder should provide the correct operating force to match the chuck, the supply of line pressure to the cylinder should be adjusted accordingly. Each base jaw is provided with a lubricating nipple. These chucks are offered both in two-jaw and three-jaw versions.
Product Details:
Brand
|
Wintech
|
Model No
|
165 WHL
|
Open Center Diameter
|
38 mm
|
Jaw Stroke Diameter
|
10 mm
|
Plunger Stroke
|
18 mm
|
Max Draw Bar Pull
|
2000 Kgf
|
Max Gripping Force
|
5500 Kgf
|
Max Speed
|
5000 Rpm
|
Weight Without Jaw
|
14 Kg
|