• Using the upgraded version of the stepper motor control, high stability, and fast speed.
Compatible the DXF/AI file format, support much software like ARTCAM, CLASSMATE, TYPE3, CORELDRAW, ILLUSTRATOR, FLEXISIGN, ENROUTE etc. and perfectly match with the engraving machine, plasma cutting machine and laser cutting machine.
• Automatically identify graphics inside and outside, automatic
• Calculate the length of each segment, choose any point to start and end, so convenient to make the channel letter.
• Adjust the slot depth by the computer, no need manual adjustment, more efficient.
• Same software to control all material, need to change the knife for cutting stainless steel, need 30 seconds to change knife.
• Machine Size: 1650mm*1000mm*2350mm
• Power Supply: AC220V
• Net Weight: 450KG
• Pressure: 0.3-0.6mpa
• Machine Power: 2000w
• The minimum diameter: 15mm
• The minimum bending radius: R=5cm
• The minimum distance and angle: 5mm
• Slot Degree: 45 – 135 ( no limit for flat material )
• Aluminum Flat Material and Profile: (Width 2cm – 12cm Thickness 0.4 – 1.2mm)
• Using the upgraded version of the stepper motor control, high stability, and fast speed.
Compatible the DXF/AI file format, support much software like ARTCAM, CLASSMATE, TYPE3, CORELDRAW, ILLUSTRATOR, FLEXISIGN, ENROUTE etc. and perfectly match with the engraving machine, plasma cutting machine and laser cutting machine.
• Automatically identify graphics inside and outside, automatic
• Calculate the length of each segment, choose any point to start and end, so convenient to make the channel letter.
• Adjust the slot depth by the computer, no need manual adjustment, more efficient.
• Same software to control all material, need to change the knife for cutting stainless steel, need 30 seconds to change knife.
• Machine Size: 1650mm*1000mm*2350mm
• Power Supply: AC220V
• Net Weight: 450KG
• Pressure: 0.3-0.6mpa
• Machine Power: 2000w
• The minimum diameter: 15mm
• The minimum bending radius: R=5cm
• The minimum distance and angle: 5mm
• Slot Degree: 45 – 135 ( no limit for flat material )
• Aluminum Flat Material and Profile: (Width 2cm – 12cm Thickness 0.4 – 1.2mm)